BIOCAL

BIOCAL PREPARING FOR APPLICATION

1. The temperature of the water to be used when preparing the BioCAL solution is more effective if the temperature of the plant is almost the same degrees.
2. plant nutrition making fertilization applications before BioCAL application increases the effectiveness of BioCAL.
3. BioCAL applications to be held in the afternoon are more effective than those performed at other times of the day.
4. The most effective result in BioCAL applications is achieved by making the BioCAL dose in the range of 2-5 g/liters. BioCAL's repetitive applications are more effective than those performed at other times of the day.
5. BioCAL solution preparation; BioCAL is soaked in water and the mixing process is repeated every 5 minutes and applied after 15-20 minutes provides more effective results.
6. BioCAL's all kinds of chemical drugs and plant nutrition mixing with solutions does not reduce its effect.
7. For BioCAL to enter the plant, the plant does not need to be in active growth.
8. In practice, the use of spraying tools that create a drop diameter of less than 1mm increases the effectiveness of BioCAL.
9. In plants to which BioCAL is applied plant nutrition reduces the need for fertilization to be used for the purpose of.

BIOCAL APPLICATION IN SEEDS

BioCAL increases the germination power of all kinds of seeds. It makes seeds resistant to biotic and abiotic stresses. In the use of BioCAL seeds in order to increase germination power, the seed is soaked in water, put in a damp state in BioCAL and mixed, then thrown into the seed bed.
This application protects the seed from bacterial, fungal and insect attacks, as well as the effect of increasing germination power.

BIOCAL APPLICATION AGAINST HEAT STRESSES

BioCAL makes plants more resistant to hot and cold heat stresses. It eliminates the occurrence of photosynthesis depression on hot and very hot days and allows the plant to make maximum photosynthesis all day long. Promotes plant development by keeping water losses to a minimum. Especially for the purpose of increasing frost resistance, the application to be performed at a dose of 0.5% (5 grams per liter) after leaf casting in the fall increases the rate of dry matter in the cell, allowing less water to be found at the cell level. At the same time, by increasing the concentration of ions within the cell, its resistance to cold and freezing increases plant resistance.

BIOCAL APPLICATION TO PROMOTE EARLYNESS

For earlier harvesting in early species, the harvest can be brought forward by about 7-10 days with biocal applications at a dose of 0.5% to be carried out 15-20 days apart from the explosion of buds. 7-10 days of earlyness provides an advantage in the market in species where earlyness is very important, such as grapes, cascading plums, almonds. BioCAL application, which will be performed once at a dose of 0.5% before leaf fall in the fall in the types of fruits that shed their leaves, provides early awakening. BioCAL application at a dose of 0.5% in these products, especially in production areas where there is a risk of frost in early spring, increases plant resistance to frost and/or cold in the early period.

BIOCAL APPLICATION TO INCREASE FRUIT QUALITY

BioCAL increases the amount of water-soluble dry matter (Brix) in fruits by approximately 2%. In this way, it creates the opportunity for the manufacturer to present its product to selected markets, especially since brix value and some other analysis values are predicted as quality elements in all garden products in the selection of products for marketing by hypermarket chains. Products with a 2% higher Brix value in industrial products such as tomato paste, fruit and vegetable types to be processed in canned goods increase processing efficiency and final product quality. In fruit species, it tightens the shell texture, prevents fruit cracks due to near-harvest rainfall, improves the fruit structure , increases the specific weight of the fruit, increases the brightness and allure of the fruit, increases the proportion of marketable fruits. Reduces water loss from the fruit, prevents them from cracking the fruit peel with fruit castings due to water stress. Increases the shelf life and storage time of the fruit. Prevents the appearance of physiological damages in the warehouse. Increases fruit size and yield to the unit area in all types of fruits and vegetables.

BIOCAL APPLICATION FOR THE PURPOSE OF INCREASING PRODUCT QUALITY AND QUALITY IN THE PRODUCTION OF VEGETABLES OPEN AND UNDER COVER

Repeating BioCAL applications to be performed in 0.2% solution during the seedling period increase the development and quality of seedlings, and repeat biocal applications to be performed in 0.5% solution immediately after planting seedlings shorten the time of lying on the product from planting seedlings in vegetables. Increases the amount of water-soluble dry matter (Brix) in fruits by approximately 2%. It improves fruit size and quality, provides the opportunity to market the product in hypermarket chains. A 2% higher Brix value in vegetables to be used in industry improves processing efficiency and final product quality. Increases product quality, quantity, specific weight, taste and aroma components of the product in green vegetables, increases the yield in the unit area, increases the amount of marketable products. It provides greater resistance to diseases and pests.

BIOCAL APPLICATION FOR THE REPAIR OF DAMAGED PLANT IN FRUIT TREES AND ORNAMENTAL PLANT SPECIES

BioCAL applications, which will be performed at a dose of 0.5% on the plant trunk in the root part of the living tree species, which have damaged the crown part as a result of combustion, allow the plant to repair itself in a much shorter time. BioCAL applications to be performed at a dose of 0.5% on the plant body in very severely pruned fruit trees and ornamental plant species allow them to repair the plant itself in a much shorter time and to create young shoots again and turn to yielding products.

ORNAMENTAL PLANTS, BIOCAL APPLICATION TO WARN YOUNG PLANT DEVELOPMENT WITH THE PRODUCTION OF FIBER IN VINEYARD FRUIT SPECIES

The application made in the form of placing the seeds soaked in water in the production of seeds in BioCAL and stirring them into the seed bed stimulates seed germination and the development of young plants, allowing them to reach the level of early vaccinatable development. In plant species replicated with green steels, oxin has been applied and/or planted in the rooting environment without application, applications to be made in the form of a 2% solution promote rooting and sapling development in steels and increase the yield and quality of seedlings. In plant species replicated with wooded steels, the application made in the form of placing water-soaked steels in BioCAL and planting them in the rooting environment after mixing encourages rooting in steels as well as applications to be made in a 0.5% solution after the buds wake up. Increases the yield and quality of seedlings. BioCAL application to the roots of seedlings in powder form of up to 1 gram per plant increases the retention success of newly planted seedlings and promotes root development. Applications to be performed in a 0.5% solution after the awakening of the buds increase the development of the sapling crown. Repeated applications in this way shorten the youthful period in the types of vineyards and fruits, encourage the sapling to form flower buds early and lay on the product.