BIOTEAM

How should Bioteam be applied?

Accurate and complete applications greatly increase bioteam's success rate in its biological effectiveness. Please read the step-by-step considerations carefully and complete them before applying Bioteam.

What should we pay attention to before bioteam application?

Packaging Selection and Storage Conditions

• 500 million, 250 million and 50 million pieces of biological control bioteam packages containing the factor are available.
• 0.5 million Bioteam bioteams in practice for each tree control choose the most suitable packaging you need.
• The bioteam package opened should be used at 1 time.
• Be sure to check the expiration date on the package before use.
• Bioteam's shelf life is a biological product, so it is a maximum of 1 month.
• After bioteam is received, it must be stored at temperatures of 2-6 °C and in a dark environment if it is to be used at a later date.
• Bioteam is active in the range of 8-28 °C.

Preparation of Bioteam

• Motorized sprayers, sprinkler systems, back pump and even a gardener's bucket can be used.
• It should be ensured that it is completely CLEAN without filling the application tank with water.
• First, the application tank must be filled with cold (15-20 °C) and clean water, half of which is CHLOR-free.
• The total amount of water is adjusted to each 1 m² application area with 5-10 liters of water for at least every plant.
• To prevent obstruction, all FILTERS and SIEDs inside the application tank must be removed.
• The spray head must be GREATER than 0.5 MM (500 MICRON) to prevent clogging.
• The entire bioteam package should first be added to 10 liters of water in a separate bucket and mixed for 5 minutes.
• HOMOGENEOUS MIXING in the bucket should be transferred to the application tank, half of which is full of water, and the remaining amount of water should be added to the tank.    

Application of Bioteam

• A total of 1 million Bioteams should be used for each tree.
• Max on the spray nose and pistol. 5 bar pressure should be applied.
• To prevent the mixture from sinking to the bottom, it is ensured that the mixer works during the application.
• THE MIXING PROCESS must continue until the application ends.
• After application, soil moisture should be stored by watering.